Supply HEPA Filter
Imported Minipleat HEPA filter with hot melt technology, which conforms to EU-14 Grade at supply position with an efficiency rating better than 99.997% for 0.3 micron.
Exhaust HEPA
Imported Minipleat HEPA filter with hot melt technology, which conforms to EU-14 Grade at exhaust position with an efficiency rating better than 99.997% for 0.3 micron.
Pre-filter
Pre-filters are made from non-woven synthetic with HDPE mesh; conform to EU-06 Grade, with an efficiency rating better than 95% down to 5 micron.
Motor Blower Assembly Set
Motor blower designed of statically and dynamically balanced for supply of sufficient capacity and static pressure to take care of air flow requirement for entire life of HEPA filter.
Differential Pressure Gauge
Magnehelic gauge (0–25 mmwc: 2 No.) to monitor pressure drop across HEPA filter & work area with respect to ambient.
Lighting
LED light (250 Lux) at work surface.
ON/OFF Switches
Keypad ON/OFF switches for operating motor blower, UV light & LED light.
SS 304 Worktable
SS 304 perforated working panel provided; this panel is fixed in work table through screw. In case cleaning the working table, remove this panel and clean the working table.
Front Door
1-piece fully openable sliding toughened glass with counter weight arrangement.
Door Opening Alarm
Alarm triggers in case front door is raised more than 8" (i.e., safe clear door opening during operation).
Exhaust Duct
SS 304, 1 feet long elbow.
Side Panels
Double walled flushed toughened glass side panels.
Noise Level
Less than 75 dB on Scale ‘A’ when ambient is not greater than 60 dB on Scale ‘A’.
Electrical Supply
230V AC 1-Φ 50 Hz / 415V AC 3-Φ 50 Hz
Vibration Level
Minimum