HEPA Filter
Imported Minipleat HEPA filter with hot melt technology which conforms to EU-14 Grade at supply position with an efficiency rating better than 99.997% for 0.3 micron.Pre-filter
Pre-filters are made from Non-woven synthetic with HDPE mesh conforms to EU-06 Grade, with an efficiency rating better than 95% down to 5 micron.Motor Blower Assembly Set
Motor blower designed of statically and dynamically balanced for supply of sufficient capacity and static pressure to take care of air flow requirement for entire life of HEPA filter.Pressure Gauge
Magnehelic gauge (0–25 mmwc: 1 No.) to monitor pressure drop across HEPA filter.Lighting
LED Light with milky white acrylic sheet (250 Lux) at work surface.ON/OFF Switches
Keypad ON/OFF switches for motor blower, UV light & LED light.Switch Socket
6/15 Amp single-phase switch socket used for external equipment.Work Table
SS work table with due reinforcement.Side Panel
Glass side panel screen for maximum visibility.PAO Port
PAO test port at upstream of HEPA filter integrity test (with PAO solution).Noise Level
Less than 75 dB on Scale ‘A’ when ambient is not greater than 60 dB on Scale ‘A’.Electrical Supply
230V AC 1-Φ 50 Hz / 415V AC 3-Φ 50 HzVibration Level
Minimum
HORIZONTAL LAMINAR AIR FLOW
Horizontal Laminar Air Flow Work station is designed specifically for highest product protection by providing ISO class 5 particle free work area for handling critical process. The main HEPA Filter is situated immediately behind the working area, clean air is then across the work surface towards the operator. The work area is continuously supplied with positive pressure HEPA horizontal air flow. It prevents contamination from operator and environment to work area. The laminarity of the flow prevents cross contamination between the items handled in the working space.
