Supply HEPA Filter
Imported Minipleat HEPA Filter with hot melt technology which conforms to EU-14 Grade at supply position with an efficiency rating better than 99.997% for 0.3 micron.
Exhaust HEPA Filter
Imported Minipleat HEPA Filter with hot melt technology which conforms to EU-14 Grade at exhaust position with an efficiency rating better than 99.997% for 0.3 micron.
Intermediate Filter
Intermediate Filter are made from Non-Woven Synthetic with HDPE mesh conforms to EU-7 Grade, with an efficiency rating better than 95% down to 3 micron.
Pre-Filter
Pre-Filter are made from Non-Woven Synthetic with HDPE mesh conforms to EU-4 Grade, with an efficiency rating better than 90% down to 10 micron.
Motor Blower Assembly
Motor blower designed of statically and dynamically balanced for supply of sufficient capacity and static pressure to take care of air flow requirement for entire life of HEPA Filter.
Differential Pressure Gauge
Magnehelic Gauge (0–25 mmwc: 1 No.) to monitor pressure drop across HEPA filter & Intermediate filter (0–10 mmwc: 1 No.).
Lighting
LED Light with Milky White acrylic sheet (250 Lux) at work surface.
ON/OFF Switches
Keypad ON/OFF Switches for motor blower & lights.
Switch Socket
6/15 amp single-phase switch socket used for external equipment.
Control Panel
Electrical control panel mounted on the inside of the unit.
PAO Port
PAO test port at upstream of HEPA filter integrity test (with PAO solution).
Side Panel
SS 304, Puffing Double walled side panels.
Electrical Supply
230V AC 3Ø 50 Hz / 415V AC 3Ø 50 Hz
Noise Level
Less than 75 dB on Scale ‘A’ when ambient is not greater than 60 dB on Scale ‘A’.
Vibration Level
Minimum